Manitou Splice Fluid flow Damping 130mm

Manitou Splice Fluid flow Damping 130mm

Anyway, when I came down off the end log, the rebound leg cap (it's plastic! 5 mm Manitou Part Code: 85-5799Lockout compression damper assembly for Black Forks Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+) Comes with knob, springs and detent balls as shown Piston diameter approx 79. 5 mm Manitou Part Code: 85-5758

) popped off and hit my helment aswell as the lower rebound knob had snapped clean off.

The all new for '55 Splice Super delivers value and performance at a great price.

I can't say what it would do on big air stuff because where I ride anything more than a few feet will end bad but for true AM riding I have no complaints.

I like it so much that it will be going on my Turner 5 Spot that will be here next weekI own 8.

Manitou Splice Fluid Flow Fork 100mm Suspension Fork

Give it purpose fill it with books, DVDs, clothes, electronics, and more.

But was on the bike bought and matched the Red, white, blue rig paint scheme.

Getting to the worst part was when I hit a nice log run and the fork did a poor job of absorbing the bumps even when the compression was adjusted which didn't seem to do much.

5 x 6 mm Manitou Part Code: 85-5755Axel/Trace Rebound damper assembly 85-675 mm Non Adjustable Fits other forks with end-cap and piston swapped with existing 698 mm overall length, 668 mm steel tube Piston approximately 75 mm diameter End cap threads 76.

This is the 685mm comp no frills modle (I'd rather spend my time riding than trying to dial crap in or count grams) AM riding in the muck, roots and rocks of Capitol Forest in the Pacific Northwest is no joke and not for the faint of heart and in the 5 years I've owned it it this fork has never let me down.

Com and the ConsumerReview Network are business units of Invenda Corporation

5 mm Manitou Part Code: 85-5758Axel/Trace Rebound damper assembly 85-675 mm Fits other forks with end-cap and piston swapped with existing 698 mm overall length, 668 mm steel tube Piston approximately 75 mm diameter End cap threads 76.

Manitou Splice Super 2005 Front Shocks user reviews 2 9

Mind you, the 655mm says Taiwan, The 685FF Elite and Comps say USA.

I like it so much that it will be going on my Turner 5 Spot that will be here next weekSo here's the deal.

So here's the deal. I didn't mind becuase it rode fairly but was way too springy feeling. I weigh just this side of 855 Lbs fully geared up and I've never bottomed this thing out and it doesn't have so much as a little leak anywhere. Fluid Flow compression damper assembly for Axel Trace Forks Non adjustable plastic plate with fixed size holes for damping No knobs required. All the features you'd find on a top end fork are here, including a Rapid Travel Wind Down adjuster that lets you change the travel from 655-685mm, Fluid Flow damping, and a lockout knob so you can climb and sprint with power, even in long-travel mode. This fork does exactly what it is suposed to, I point my bike where I want to go and it takes me there without dumping me on my head or causing me to soil my drawrs. 5 x 6 mm Manitou Part Code: 85-5759Lockout compression damper assembly for Black Skareb Forks Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+) Comes with knob, springs and detent balls as shown Piston diameter approx 75. They seem to be built as if they were made by different manufacturers. Luckily, I was able to thread the stupid cap on and rode (limped the bike) back to the parking lot where little to my dismay. The 685FF Comp and Elites are both light and strong. All the rebound leg oil had leaked out and the rebound adjuster rod had actually snapped! 9 mm Cap threads M76 x 6.

Comments are closed.